BLS 211 Gas filter A2 for respiratory masks series 4000 and 5000

A2 Gas filter BLS® 211 with b-lock for series 4000 / 5000Protects against organic gases and vapours with a boiling point above 65°C and can be employed with substances as solvents and microorganisms, etc.CharacteristicsReplacement filter for BLS half and full face masks , , , 5600, 5700Protection class A2ReusableBayonet connection allows a quick and safe hold on the maskNo adapters or pre-filters neededActivated carbon: The quality of BLS activated carbon used for the filtration of gases and vapours meets high safety standards and ensures excellent filtration performance. They are manufactured without toxic additives such as hexavalent chromium (Cr VI) and are certified food grade (REGVE231 / 2017).Filter housing made of ABS non-deformable. The housing is built to ensure 100% performance of the filtersCertificationFollow the requirements of European Regulation 425/2016 (Personal Protective Equipment).Certified as 3rd category personal protective equipment, in compliance with EN 143:2000 + A1:2006 and EN 14387:2004 + A1:2008 standards.They are certified and tested according to module D at Italcert S.r.l. (Personal Protective Equipment)CE markedBLS management system is ISO 9001:2008 certifiedMaterialFilter canister: Acrylonitrile butadiene styrene (ABS)Filtering material: activated charcoal A typeStorageShelf life: 5 yearsTemperature: -10° / +50° CRelative humidity: 70% maxPackagingSingle packed, box includes 8 pcs, carton with 8 boxes (64 pcs)Identifications for gas filterA1 Organic gases and vapors with boiling point > 65 ° C; 10 x workplace exposure limit or 1000 ppmA2 Organic gases and vapors with boiling point > 65 ° C; 10 x workplace exposure limit or 5000 ppm (e.g. as for A1 but at higher concentrations)AX Organic gases and vapors with boiling point ≤ 65 ° CB Inorganic gases and vapors (e.g. chlorine, hydrogen sulfide, hydrogen cyanide)E Acid gases and vapors (e.g. sulfur dioxide, hydrogen chloride)K Ammonia and derivativesHg Mercury vapourP Particles, mists, fumesOverview Table of Filter ClassesFilter ClassMeaningTypical Application / ProtectionParticulate Filters (P Classes)P1For coarse mechanically generated particles(up to 4 times the limit value)Grinding, milling, drillingP2For finer mechanical and thermal particles(up to 10 times the limit value)Welding, soldering, fine dustP3For highly toxic or very fine particles(up to 30 times the limit value)Asbestos, mold, viruses, nanoparticlesGas and Vapor Filters (A–K, Hg, AX)A*Organic vapours (boiling point > 65 °C)General protection against solventsA1*Like A, with lower capacityWater-based paints, paints with residual solventsA2*Like A, with higher capacityPetrol, paint thinners, solvent-based paints, adhesivesBInorganic gases/vapoursChlorine, hydrogen sulphide, hydrogen cyanideEAcid gases/vapoursSulphur dioxide, hydrochloric acid, acid mistsKAmmonia and derivativesFertilizers, slurry, laboratory processesHgMercury vapourLaboratory accidents, hazardous waste (max. 50 h use)AXOrganic vapours (boiling point < 65 °C)Highly volatile solvents (only with full-face mask)Additional MarkingsRReusableSuitable for multiple work shiftsNRNot reusableApproved for one work shift onlyDDolomite dust test passedIncreased service life under high dust load* Note: Please ensure that the selected respiratory protective equipment is suitable for the specific hazardous substance and its concentration before use, in ac Information on product safety (Manufacturer, Contact)BLS Germany GmbH, Steindeich 1a, 25377 Kollmar, GERMANY, 0800 - 5015 000, , www.blsgroup.de