Castrol Molub-Alloy GM 90/220 Gear oil with lubricating solids 20L

Castrol Molub-Alloy GM 90/220 (previously called Molub-Alloy™ 90/220) gear oils (SAE 90 / ISO VG 220) were developed for the lubrication of enclosed gears.They are manufactured from the highest quality components that have been carefully selected for their compatibility with Molub-Alloy GM lubricating solids.ApplicationMolub-Alloy GM gear oils are recommended for spur, helical, herringbone, and straight or spiral bevel gears.They are especially suited for heavy duty and shock loading where Extreme Pressure (EP) characteristics are required. They should not be used where gear manufacturers specify the use of non-EP lubricants. For severe worm gear service where ‘compounded’ gear oils are recommended, please refer to Molub-Alloy GM 170w / 680. Molub-Alloy GM gear oil 300 S / 1000 is especially suited for service in enclosed gears for heavy-duty industry and mining machinery.AdvantagesReduced friction, most evident under boundary conditions, is directly attributed to the presence of specially compounded lubricating solids. This benefit is most pronounced where frequent start-up, slow speeds, and high and unexpected loads are encountered.The establishment of a protective layer of Molub-Alloy GM solids provides substantial increase in the working life of both parts and lubricant. This increases load bearing area which can reduce unit pressures operating temperatures, and wear.Realistic energy savings are possible through a reduction in peak power demand during cold start-up.Seal leakage is greatly reduced. Only compatible base oils that control rubber swelling tendencies are used. The Molub-Alloy GM solids lubricate and improve seal contact surfaces.Overall savings are derived from the above and result from less labour and downtime, smoother, more efficient operation with longer parts life, and extended lubrication cyclesTechnical specificationsISO viscosity grade DIN 51519: 220SAE viscosity grade DIN 51512: 90Density @ 15°C / 59°F kg/m³: 890Kinematic Viscosity @ 40°C / 104°F mm²/s: 220Kinematic Viscosity @ 100°C / 212°F mm²/s: 19Viscosity Index: 96Flash Point – open cup method °C/°F: 230/446Pour Point °C/°F: -18/0Volume: 20l canisterAlso available in: 208l barrelGLIS number: 156DF1MSDS code:468736Castrol Molub Alloy GM 90/220, Castrol Molub-Alloy GM 90 220, Castrol Molub Alloy GM 90 220, Castrol Molub Alloy GM 90-220 Information on product safety (Manufacturer, Contact)BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, , www.bp.com