Delo-Photobond AD494 modified acrylate, UV-/VIS-curing 30g cartridge

DELO® PHOTOBOND® AD494 modified acrylate | 1C | UV- / VIS-curing thixotropic, unfilled | tension-equalizing, peel-resistantBasemodified acrylateOne-component, solvent-freeUseSpecifically developed for interior visual bondings, e. g., bonding of prisms for beamers-   high transparency and permanent light fastnessVery good  capillary propertiesEasy processing at room lighting is possibleThe cured product is normally used in a temperature range of -40 °C to +120 °C; depending onthe application, other limits may be more reasonableCompliant with RoHS directive 2015/863/EUProcessingThe adhesive is supplied ready for use; in case of cool storage, it must be ensured that thecontainer is conditioned to room temperature before useThe containers are conditioned at room temperature (+18 °C to +25 °C); the conditioning time isapprox. 0.5 h for containers up to 50 ml and approx. 4 h for containers up to 1,000 ml; additional heat addition is not allowed-   the adhesive can be applied by dispensingThe surfaces to be bonded must be dry as well as free of dust, grease and other contaminationsDispensing valves and product-bearing elements must be carefully cleaned before use,residues of other products must be completely removed; DELOTHEN EP as well as acetone,isopropanol or a mixture of both are recommended to remove DELO-PHOTOBOND residuesFor further information please refer to our instructions for use DELO-PHOTOBOND and thebrochure “Light Curing”CuringCuring with UV light in a wavelength range from 320 to 400 nm. DELOLUX LED curing lampsare especially suitable as per the chart below. All standard DELOLUX HID discharge lamps arealso suitable-   increased intensities shorten the required irradiation time, lower intensities prolong it.Content 30g bottleTechnical specificationsTension-equalizingSuitable lamp types: LED 365 nm, LED 400 nm, UVAColor in uncured condition: yellowishColor in cured condition in 0.1 mm layer thickness colorlessColor in cured condition in 1 mm layer thickness colorlessDensity 1.7 g/cm³Viscosity (Liquid | Viscosimeter): 3200 mPa·sStorage life in unopened original container (at 0 °C to +10 °C ): 6 months Information on product safety (Manufacturer, Contact)DELO Industrie Klebstoffe GmbH & Co. KGaA, DELO-Allee 1, 86949 Windach, GERMANY, +49 8193 9900-0, , www.delo.de