Klüber POLYLUB HVT 50 A Lubricant for gearwheels and chains 400ml

POLYLUB HVT 50 A Lubricant for gearwheels, chains and wire ropes | N° 081041POLYLUB HVT 50 A is a very viscous and permanently elastic lubricant based on mineral oil and solvents.Content: 400ml spray canBenefits for your applicationReduces noiseNo raw materials containing silicone, Adhesive lubricantContains anticorrosion additiveApplicationVersatile adhesive lubricant for open gears, driving, control and conveyor chains, steering racks in e.g. knitting machines and guide rails in conveyorsApplication notesShake can well before spraying and allow the solvent to evaporate (approx. 15 min.). Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition. To ensure safe handling please refer to safety data sheet and can label. Technical specifications Article number 081041 Composition, type of oil  mineral oil Colour space  brown Service temperature, lower limit  -10 °C Service temperature, upper limit  150 °C Density, DIN 51757, 20°C  approx. 0.94 g/cm³ Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 40°C, 300 s⁻¹, lower limit 30000 mPas Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 40°C, 300 s⁻¹, upper limit 40000 mPas Hazard Statements (CLP)Signal word: Danger.Hazard Statements (H-Sentences)H222: Extremely flammable aerosol.H229: Pressurized container: May burst if heated.H304: May be fatal if swallowed and enters airways.H412: Toxic to aquatic life with long-lasting effects.Precautionary Statements (P-Sentences)Prevention:P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.Response:P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.P331: Do not induce vomiting.Storage:P410 + P412: Protect from sunlight and do not expose to temperatures exceeding 50 °C/122 °F.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com