Klüber SYNTHESO GLEP 1 Special grease with EP additive 400g

Special lubricating grease with EP additives, compatible with EPDM.SYNTHESO GLEP 1 is a special lubricant for a wide variety of applications with an almost neutral behaviour towards many elastomers (including EPDM) and plastics (except PC and ABS). SYNTHESO GLEP 1 can be used in a wide service temperature range and offers efficient protection against wear, good adhesion and resistance to water.Benefits for your application:Special lubricating grease for the assembly and lifetime lubrication of elastomersAlmost neutral towards most sliding material pairings like EPDM/metal or plasticReduces friction and wearApplication:SYNTHESO GLEP has been designed for the lubrication of:metal – metal;elastomer – metalplastic – metalplastic – plasticsliding material combinations.The product is typically used in the automotive industry as assembly grease for plain bearings, e.g. in brake and clutch systems for linear motion in contact with brake fluids DOT 3, 4 and 5.1.Application examples: guide bushes and bolts, EPDM and SBR seals, clutch master and slave cylinders, corrosion protection of brake pad supports in disc brake calipers, brake boosters and noise reduction in elastic axle bearings, seals of steering columns. In such applications, SYNTHESO GLEP 1 facilitates assembly and provides reliable lubrication.Due to its good resistance to EPDM elastomers, SYNTHESO GLEP 1 is mainly used in car brakes as it offers good advantages versus silicone greases, like better load-carrying capacity, good adhesion and compatibility with electric contacts.Application notes:SYNTHESO GLEP 1 can be applied by brush, spatula, grease gun or the usual central lubrication systems.We do not recommend using SYNTHESO GLEP 1 in context with aluminum or aluminum alloys under dynamically high load conditions.Owing to the many different elastomer and plastic compositions we recommend checking their compatibility prior to series application.Minimum shelf life:The minimum shelf life is approx. 36 months if the product is stored in its unopened original container in a dry, frost-free place.Product data: Base oil PAG Thickener special lithium soap Color beige Texture homogeneous, fibrous Density at 20 °C, [g/cm³], approx. 0.97 Worked penetration, DIN ISO 2137 [0.1 mm] 280 – 310 Service temperature range, [°C] approx. – 50 to 150 Drop point, [°C] DIN ISO 2176 > 220 Kinematic viscosity of the base oil, DIN 51562 part 01, Ubbelohde, 40°C [mm²/sec] 350 – 375 Apparent dynamic viscosity, [mPas] approx. at 25 °C and shear rate = 300 s-1 4500 Copper corrosion, DIN 51811, 24h/100°C 1-100 Corrosion protection, DIN 51802, (SKF-EMCOR), 1 week, distilled water < 1 Flow pressure, DIN 51805, -45°C [mbar] < 1400 Water resistance, DIN 51807, part 01, 3h/90°C 1-90 Hazard Information (CLP)Signal word: Warning.Hazard Statements (H-phrases)H317 May cause an allergic skin reaction.H411 Toxic to aquatic life with long lasting effects.Precautionary Statements (P-phrases)Prevention:P272 Contaminated work clothing should not be allowed out of the workplace.P273 Avoid release to the environment.P280 Wear protective gloves.Response:P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.P362 + P364 Take off contaminated clothing and wash it before reuse.P391 Collect spillage.Hazardous Components for LabelingCondensation products of fatty acids, tall oil with 2-amino-2-ethylpropanedio Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com