Klüber Unisilkon L 250 L Grease for valves and fittings 60g tube

UNISILKON L 250 L Special lubricating grease for drinking water, beverage and heating valves and fittingsUNISILKON L 250 L is a special lubricant based on silicone oil and PTFE with high thermal stability. UNISILKON L 250 L offers good penetration ability in small lubrication gaps and lube points of difficult access. Owing to its relatively high viscosity, adhesion is improved even in case of unfavourable geometries.UNISILKON L 250 L is resistant to cold and hot water, superheated steam up to approx. 130 °C as well as industrial cleaning agents and disinfectants. UNISILKON L 250 L is also resistant to pumpable foodstuffs and beverages like fruit juices, beer or milk products. UNISILKON L 250 L is not resistant toorganic solvents or strong acid and alkaline solutions.UNISILKON L 250 L is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of UNISILKON L 250 L can contribute to increase reliability of your production processes.We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.Temperature range: -45°C to +160°C Volume: Tube 60gAlso available in: Cartridge 500g, Can750 g, Bucket 30kgBenefits for your applicationProven effective in valves and fittings as well as adjusting mechanisms in the drinking water, beverage, sanitary and heating sectorsCertified acc. to international standards for valves and fittings, e.g. DVGW-KTW, WRAS, ACS, AS 4020, NSF Standard 61 and NSF H1Long-term protection of seals and bearings owing to the lubricant’s good resistance to numerous media like disinfectants, cleaning agents, water, steamApplicationsUNISILKON L 250 L is used as lubricating and sealing grease for:domestic valves & fittings for drinking water, (e.g. ceramic discs and piston cartouches, thermo regulators). As the lubricant’s viscosity is rather independent of service temperatures, UNISILKON L 250 L allows constant actuating forces within the whole cold/hot water range of e.g. single-lever mixer taps.valves and fittings of heating installations (e.g. thermoregulators, tap cocks, pressfit seals)UNISILKON L 250 L has also proven effective as assembly aid for radial shaft seals and packings in contact with cold or hot water and steam.Application notesUNISILKON L 250 L is neutral towards most metals, thermoplastics and elastomers. Owing to the many different elastomer and plastic compositions their  compatibility should be checked prior to series applications. UNISILKON L 250 L can be applied by means of spatula, brush, usual metering devices or the tampon printing method. Please observe the material safety data sheet.Technical specifications Article number 022102 NLGI grade, DIN 51818 3 NSF-H1 registration 141 714 Chemical composition, type of oil methyl silicone oil Chemical composition, solid lubricant PTFE Lower service temperature -45 °C / -49 °F Upper service temperature 160 °C / 320 °F Color space white Texture fibrous Texture homogeneous Density at 20 °C approx. 1.25 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 220 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 250 x 0.1 mm Shear viscosity at 25 °C, shear rate 300 s-1, equipment:rotational viscometer approx. 13 000 mPas Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 25 °C approx. 1 350 mm²/s Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C 1 – 100 corrosion degree Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating <= 1 - 90 Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 monthsKlüber UNISILKON L250L, Klueber, Kluber UNISILKON L250 L, L 250L Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com