Klüber WOLFRASYN ULAF High-temperature graphite paste 600g can

WOLFRASYN ULAF Graphite containing high-temperature paste | N° 003001WOLFRASYN ULAF is a graphite-containing high-temperature paste for thin-film lubrication of rolling and plain bearings. It has a chemical composition of polyalkylene glycol oil and an inorganic solid lubricant (graphite).The synthetic base oil evaporates at temperatures above 200 °C. The solid lubricant residue is effective up to 400 °C as a dry lubricant.Temperature range: -30°C to +400°C Volume: 600g canAlso available in: 25kg bucketBenefits for your applicationFor the thin-film lubrication of low-speed rolling and plain bearingsFor lubricant applications up to 400 °CAlso suitable for low temperaturesHigh load-carrying capacityApplicationsWOLFRASYN ULAF has proven effective as a lubricant for kiln cart bearings in the ceramic industry and for feeder bearings subject to high temperatures in the glass industry.Other possible applications: as a bearing lubricant for roller tables in steel plants, for conveyor and transport chains in hightemperature applications and as a lubricant for plain bearings operating at high temperatures.Application notesNoted: Always apply WOLFRASYN ULAF in a thin layer!Clean the friction point with a sol-vent and remove any corrosion agent in the bearing before applying WOLFRASYN ULAF. Then use a brush of medium hardness to apply an even layer of WOLFRASYN ULAF to the entire raceway of the bearing.We recommend rotating the bearing components several times while applying the lubricant in order to ensure an even distribution over the raceway. If, during the rotation, a greasecollar appears, remove it with the brush.Technical specifications Upper service temperature 400 °C / 752 °F Lower service temperature -30 °C / -22 °F Worked penetration, DIN ISO 2137, 25 °C, upper limit value 320 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, lower limit value 290 x 0.1 mm Flow pressure of lubricating greases, DIN 51805-2, test temperature: -30 °C <= 1 400 mbar Four-ball tester, welding load, DIN 51350 pt. 04 >= 3 600 N Density at 20 °C approx. 1.30 g/cm³ Colour space blackHazard Information (CLP)Signal word: Warning.Hazard Statements (H-Statements)H317 May cause an allergic skin reaction.H412 Harmful to aquatic life with long-lasting effects.Precautionary Statements (P-Statements)Prevention:P261 Avoid breathing vapor.P272 Contaminated work clothing should not be allowed out of the workplace.P273 Avoid release to the environment.P280 Wear protective gloves.Response:P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.P362 + P364 Take off contaminated clothing and wash it before reuse.Hazardous Component(s) for Labeling:N-1-Naphthylaniline  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com