Klüberbio AG 39-602 N Adhesive lubricant for open gears 1kg can

Klüberbio AG 39-602 N Environmentally acceptable adhesive lubricant for open gears and steel cables | N° 009092Open gears and steel ropes operating in a maritime environment are subject to extreme loads and requirements. Saline and humid air, strong temperature fluctuations and splash water or constant contact with seawater take their toll on the equipment used.The high-performance adhesive lubricant Klüberbio AG 39-602 N meets these demanding requirements by its good adhesion to surfaces as well as due to its excellent anticorrosive effect.Temperature range: -20°C to +120°C Volume:  1 kg canAlso available in: 25 kg bucket, 180 kg drumBenefits for your applicationMeets the requirements for Environmentally Acceptable Lubricants (EAL) as defined in Appendix A of the 2013 Vessel General PermitLong relubrication intervals due to good adhesion and water resistance.Corrosion protection also under influence of seawater due to specially selected anti-corrosion additivesApplicationsKlüberbio 39-601 N was developed for the lubrication of open pinion gears on winches and jack-up platforms, as well as steel cables in contact with water.The product can also be used in other maritime applications that require lubricants to have good water washout resistance, very good anti-corrosion resistance and/or good load-carrying capacity e.g. in low-speed plain bearings, guide rails and open winch gears.Application notesKlüberbio AG 39-601 N can be applied continuously through transfer lubrication with pinion or by brush. Compressed-air lubrication equipment can be used for the lubrication of steel cables. The required lubricant quantity depends on the operating conditions in each individual case.Technical specifications Colour space beige Texture  homogeneous Chemical composition, type of oil ester oil Chemical composition, thickener calcium soap Lower service temperature -20 °C / -4 °F Upper service temperature 120 °C / 248 °F Density at 20 °C approx. 0.95 g/cm³ Drop point, DIN ISO 2176, IP 396 >= 130 °C Biodegradability in acc. with OECD 301 B, 28d >= 60 % Flow pressure of lubricating greases, DIN 51805, test temperature: -20 °C <= 1 400 mbar Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com