Klüberspeed BF 72-22 High-speed lubricating grease beige 1kg can

Klüberspeed BF 72-22  High-performance special grease with a synthetic base oil and a polyurea thickener | N° 004043Klüberspeed BF 72-22 is a high-performance special grease with a synthetic base oil and a polyurea thickener.The base oil viscosity and its viscosity-temperature characteristics allow Klüberspeed BF 72-22 to be used for a wide range of speeds and temperatures.Tests have shown that Klüberspeed BF 72-22 is suitable for extremely high speeds; speed factors of up to 2 million were attained. Klüberspeed BF 72‑22 also allows shorter running-in times and has a long service life.Pack sizes: 1kg canBenefits for your applicationVery good resistance to water and anticorrosive effect protect bearings against premature failure, thus helping tominimize maintenance costs.Low starting torque enables problem-free operation and energy savings also at low temperaturesLong-term successful use in particular at high speedsShorter running-in of spindle bearingsApplicationsKlüberspeed BF 72-22 is preferred for use in horizontally mounted spindles in milling, grinding and drilling machines and lathes running at very high speeds and high permanent temperatures. Such high speeds are frequently encountered in motor-powered spindle bearings.Klüberspeed BF 72-22 is also suitable for other high-speed bearings as are found in power tools, electric motors, etc.. Other uses include the greasing of tooth flanks in precision gears (e.g. bevel gears in milling machines, electro-mechanical valve actuators).Application notesKlüberspeed BF 72-22 can be filled into the bearings using normal grease application tools (e.g. spatula, grease gun). Application by means of industrial central lubricating systems and metering devices is also possible.The possibility of a change in colour is inherent in this product concept. It has, however, no influence on product performance.Technical specifications Chemical composition, thickener polyurea Lower service temperature -50 °C / -58 °F Upper service temperature 120 °C / 248 °F Colour space beige Density at 20 °C approx. 0.92 g/cm³   Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 22 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C   approx. 5 mm²/s Drop point, DIN ISO 2176, IP 396  >= 220 °C Oil separation, DIN 51817 N, after 7 d/40 °C <= 3 % by weigh Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating <= 1 - 90 Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com