Klübersynth R 42-111 Fully synthetic speciality grease for seals 1kg

Klübersynth R 42-111 Optimised lubrication of heavily loaded radial shaft seals | N° 094119Your gearboxes contain numerous seals whose long-term functioning is essential for low-friction operation. Any leakage leads to time-consuming and expensive maintenance operations.Klübersynth R 42-111 was especially developed for the optimised operation of radial shaft seals and to facilitate proper seal assembly.The use of fully synthetic base oils enables for-life lubrication, especially at high temperatures. The particular mix of base oils used leads to extraordinarily good compatibility with many frequently used elastomers (NBR, ACM, FKM) and plastics.Klübersynth R 42-111 lubricates the seal during start-stop operation until the (gear) oil reaches the seal. It also improves seal lip wetting by the oil. Dirt and moisture are reliably prevented from entering the gearbox.Temperature range: -40°C to +150°C Volume: 1 kg can Also available in: 400 g cartridge, 45 g tube, bucket 25kgBenefits for your applicationOptimised lubrication of heavily loaded radial shaft sealsExtends the service life of your sealsEnables reliable lubrication in start-stop operationEasier seal assemblyLonger component availability due to reduction of leakageVersatile uses due to excellent compatibility with elastomersApplicationsKlübersynth R 42-111 is extremely well suitable for the lubrication of seals and plastics that are often used in gearboxes and motors:Radial shaft seals made of FKM, NBR, ACMO-ring seals made of NBR, HNBR or FKMPlastics such as POM or PAApplication notesKlübersynth R 42-111 has been tested and approved for contact-free greasing in minimum dosing quantities starting from 0.1 mg via electro-pneumatic jet valves. If the lubricant is to be pumped and applied via automatic systems, or intended for series application, the correct function must be checked with the equipment manufacturer in advance.Technical specifications Colour space brown Chemical composition, type of oil ester oil Chemical composition, type of oil synthetic hydrocarbon oil Chemical composition, thickener special lithium soap Lower service temperature -40 °C / -40 °F Upper service temperature 150 °C / 302 °F Density at 20 °C approx. 0.92 g/cm³ Drop point, DIN ISO 2176, IP 396 >= 250 °C Flow pressure of lubricating greases, DIN 51805-2, test temperature: -40 °C <= 700 mbar Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 110 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 14 mm²/s Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com