Klübersynth VR 69-252 N Lubrication valve grease 1kg can

Klübersynth VR 69-252 N  Special lubricating grease for drinking water taps containing e.g. EPDM and/or NBR elastomers | N° 012273Klübersynth VR 69-252 N is a tailor-made, highly adhesive, light-colored lubricating grease based on fatty oil, calcium soap and PTFE.With a carefully selected combination of active substances, this lubricant offers very good performance and high functionality combined with a long service life.Klübersynth VR 69-252 N clearly surpasses the load alternation requirement of 200,000 cycles at a closing force of 2.5 Nm and is therefore in full compliance with the European standard DIN EN 200. Klübersynth VR 69-252 N meets the new drinking water and plastics guideline (KTW) of the German Umweltbundesamt (Federal Environmental Agency) and conforms to the current French positive list for drinking water applications ACS.Temperature range: -20°C to +100°C Volume: Can 1 kgAlso available in: Bucket 5 kg, Bucket 25 kg, Drum 180 kgBenefits for your applicationLonger component life due to less friction and wear, especially in brass spindle valves.Prevention of stick-slip at high tightening torques and 500,000 load cycles.A lubricant for all components meeting all technical, design and chemical requirements, e.g. the BWGL-KTW (UBA- guideline) and the French ACS Guidelines.Cost-saving as lubricant can be applied by brush or using fully automatic mass application techniques.ApplicationsKlübersynth VR 69-252 N is used for the lubrication of all friction points in valves subject to mechanical loads and in some cases also for ceramic valves containing EPDM or NBR elastomers.Further applications are in locking and control valves such as plug or ball valves, flaps, slides or other valves,and in shower and heating valves and fittings. Application notesKlübersynth VR 69-252 N can be easily applied by means of brush, sponge, spatula, grease gun or other usual metering equipment.Technical specificationsArticle number  122730037Colour space beigeDensity at 20 °C approx. 0.97 g/cm³Lower service temperature-20 °C / -4 °FUpper service temperature 100 °C / 212 °FNSF H1 registration number152147Flow pressure of lubricating greases, DIN 51805, test temperature: -20 °C <= 1 400 mbarWorked penetration, DIN ISO 2137, 25 °C, lower limit value 280 x 0.1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value310 x 0.1 mmShear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer,25°C, 300 s⁻¹, lower limit 4000 mPas Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer,25°C, 300 s⁻¹, upper limit 8000 mPasCopper corrosion, DIN 51811, 24 h, 100°C 1 - 100 - 24 corrosion degree Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopenedoriginal container, approx. 24 monthsKlübersynth VR69-252N, Klübersynth VR 69-252N, Klübersynth VR 69252N Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com