Weicon Easy-Mix HT 180 2-component epoxy adhesive black 50ml cartridge

WEICON Easy-Mix HT 180 Epoxy AdhesiveWEICON Easy-Mix HT 180 is a 2-component adhesive on epoxy resin basis and has a high temperature resistance of up to +180°C; short term to +230°C.The adhesive is highly viscous and stable which makes it also suitable for vertical applications. It is shock and impact resistant, has a long pot life, cures at room temperature, can be processed mechanically and his special fillers allow a constant bonding line. The adhesive is particularly suitable for the bonding of composite materials and metal and can be spot-welded while curing.  High-temperature resistantSteadyShock and impact resistantProcessingWEICON Easy-Mix products can be processed directly from the double cartridges with the help of the included static mixer. Reject the first 5 cm of the dosed bead. Apply adhesive to only one of the surfaces to be bonded.The pot life given is for a material quantity of 10 ml at room temperature. If larger quantities are used, the curing time will be faster. Similarly, higher ambient temperatures shorten the cure times (as a rule of thumb, every +10°C increase above room temperature will halve working and curing time). Temperatures below +16°C will extend working and curing times considerably, while below about +5°C, no reaction will take place at all.Technical specificationsBase: Epoxy resin mineral-filledTexture: paste consistency, crack-fillerColour: blackMixing ratio by weight (Resin / Hardener): 2:1Density of the mixture: 1,1 g/cm³Viscosity of the mixture at 20°C (+68°F): pastyAdhesive gap bridging up to max:. 4 mmProcessing temperature: +10 to +40 °CCuring temperature: +10 to +50 °CPot life at 20°C (+68°F) for 10ml material: 60 min.Handling strength (35% strength) after: 120 min.Capable of bearing mechanical loads (50% strength) after: 4 hHazard Warnings (CLP)Signal word: WarningHazard Statements (H-phrases)H315: Causes skin irritation.H317: May cause an allergic skin reaction.H319: Causes serious eye irritation.H411: Toxic to aquatic life with long-lasting effects.Safety Statements (P-phrases)Prevention:P280: Wear protective gloves. Wear eye or face protection.P273: Avoid release to the environment.P261: Avoid breathing vapors.P264: Wash thoroughly after use.Response:P391: Collect spillage.P362 + P364: Take off contaminated clothing and wash before reuse.P302 + P352: IF ON SKIN: Wash with plenty of water.P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P337 + P313: If eye irritation persists: Get medical advice/attention.Disposal:P501: Dispose of contents/container in accordance with local regulations.Other HazardsNo known hazards leading to classification.The product contains no PBT or vPvB substances as per Annex XIII of Regulation (EC) No 1907/2006.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)WEICON GmbH & Co. KG, Königsberger Strasse 255, 48157 Münster, GERMANY, +49 251 9322-0, , www.weicon.de