Bostik Simson ISR 70-08 AP SMP glazing adhesive for windscreens 290 ml

Bostik Simson ISR 70-08 AP is specially designed for the rapid replacement of windscreens tt 23°C and 50% relative humidityHigh quality Silyl Modified Polymer (SMP) based direct Glazing AdhesiveEspecially developed for the rapid and efficient bonding of windscreens in the Auto Aftermarket as well as in OEM, Bus, Coach & Train building and other areas of the Transport market, especially where vehicles have to be released (or moved) shortly after installationColor: blackContent: 290 ml cartridgeAlso available as: 600 ml packHighlightsBostik Simson ISR 70-08 AP combines the advantages of desired properties of structural sealants including polyurethanesSimson ISR 70- 08 AP is not reliant on the primed system to provide a cross-linking covalent bond (less chances of applicator error)Immediately after installation the product has a high Green Strength (a high internal strength), which results in a heavy paste with an extremely good slump resistance. Reaction starts with moisture and results in an irreversible vulcanized adhesive. The high green strength coupled to the high tack results in rapid bonding and makes the product very suitable for those applications where the vehicles have to be released (or moved) shortly after installationBostik Simson ISR 70-08 AP adheres well without black glass primer on glass and no UV resistant primer is needed when the glass adhesive interface is adequately UV-protected by a ceramic coatingSolvent-isocyanate- and PVC freeExcellent UV resistance and ageing propertiesExcellent temperature resistance, permanent elastic within temperatures from –40°C till +120°CNo odourPaintableVery low electrical conductivitySuitable for use with window aerialsPrevents contact corrosion on aluminium substratesNon staining – less than 1% carbon black contentPossible reduced or no clamping requiredTechnical specificationsColourBlackBasic MaterialSilyl Modified Polymer(SMP)Specific GravityApprox. 1.5Curing MethodMoistureSkin Forming Timeapprox. 15 min(20°C/50% R.H.)Open Time<15 min. (20°C/50% R.H.)Tensile Stress at Breakapprox. 2.9 MPa(DIN 53504/ISO37)Elongation at Breakapprox. 250%(DIN 53504/ISO37)Shear Stressapprox. 2.4 MPa(DIN 53283/ ASTMD1002)Isocyanate Percentage0%Temperature Resistance-40°C to+120°CTemperature Resistance+180°C (max ½ hr.)Curing Speed after 24 hrsapprox. 3 mm(20°C/50% R.H.)Shore A Hardnessapprox. 60 (DIN 53505)Volume Change<3% (DIN 52451)Electrical Volume Resistivity>1011 cm (DIN 53428)Tensile Stress (100%)Approx. 2.3 MPa(DIN 53504/ISO37) Information on product safety (Manufacturer, Contact)Bostik SA, 420 rue d’Estienne d’Orves, 92700 Colombes, FRANCE, +33 1 49 00 90 00, , www.bostik.com