Castrol Braycote Inertox 2 High-temperature grease 1kg tin

Castrol Braycote Inertox 2 High-temperature grease, NLGI grade 2Castrol Braycote™ Inertox Range (previously called Castrol Interox™ Range) are chemically and thermally stable hightemperature greases on a fully synthetic basis. There are universally applied for long-term lubrication of rolling and sliding bearings especially when exposed to hostile ambient conditions. The range consists of Braycote Inertox 400-1( previously called Inertox Light), Braycote Inertox 500-2 (previously called Inertox Medium), Braycote Inertox 240-2 (previously called Inertox Medium 150) and Braycote Inertox 2 (previously called Inertox Heavy).ApplicationFor rolling and sliding bearings with extremely extended relubrication intervals such as in:Film stretching machinesTenter frames for textilesOven carriages in the ceramics industryFor high-temperature lubrication of rolling and sliding bearings.Under hostile ambient conditions.Pumpable in central lubrication systems.Temperature application range: -25°C to +260°C (at higher operating temperatures adequate ventilation must be ensured!)Specifications / ApprovalsDIN 3536 and DIN EN 377 (DVGW)DIN EN 377 (DVGW)AdvantagesExcellent thermal stability.High wear protection and good load carrying capacity.Good corrosion protection.Non-flammable.InertBraycote Inertox 500-2 and Braycote Inertox 240-2 are approved for gas devices (DVGW)Technical specificationsColour: WhiteBase oil: PTFE / Synthetic OilDensity @ 20°C / 68°F kg/m³: 1930Worked Penetration (60 strokes @ 25°C / 77°F) 0.1 mm: 265-295Base Oil Viscosity @ 40°C / 104°F mm²/s: 148.5Water Resistance: 0Volume: 1kg tinAlso available in: GLIS number: 15D754MSDS code:468578Hazard Information (CLP)Signal word: Danger.Hazard Statements (H Codes)H318 – Causes serious eye damage.H315 – Causes skin irritation.Precautionary Statements (P Codes)Prevention:P280 – Wear protective gloves. Wear eye or face protection.P264 – Wash hands thoroughly after handling.Response:P302 + P352 + P362+P364 – IF ON SKIN: Wash with plenty of soap and water. Take off contaminated clothing and wash it before reuse.P332 + P313 – If skin irritation occurs: Get medical attention.P305 + P351 + P338 + P310 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or physician.Storage and DisposalStorage: Not applicable.Disposal: Not applicable.Other Relevant InformationHigh pressure applications: Injections through the skin require immediate medical attention. See Notes to physician in Section 4 of the Safety Data Sheet. Information on product safety (Manufacturer, Contact)BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, , www.bp.com