Klüber PETAMO GHY 133 N Long-term and high-temperature grease 1kg

Long-term and high-temperature grease for rolling bearingsPETAMO GHY 133 N is a high-performance lubricating grease for rolling bearings subject to high temperatures. It has the following advantages:– Resistance to high temperatures– High resistance to oxidation– Efficient wear protection even at high temperatures– Good corrosion protection– Good water resistanceThe high performance level of PETAMO GHY 133 N is achieved by means of selected product constituents such as polyurea thickener, mineral oil, synthetic hydrocarbon oil andadditives, as well as the production technology.Content: 1kg canAvailable in 400g cartridge, 1kg can, 25kg bucketBenefits:Reduced maintenance due to lifetime lubricationWide service temperature range allows a variety of applicationsReliable operation and long service life due to excellent protection against wear and corrosion, especially in water pump bearings and clutch release bearingsApplication:PETAMO GHY 133 N is suitable for long-term and lifetime lubrication in a variety of applications including:– Rolling bearings in– electric motors– fan heaters– drying installations– textile machines– paper machines– Automotive components, e.g.– belt tensioning rollers (rotating outer ring)– couplings– water pumps– fans– wheel bearingsIn component tests PETAMO GHY 133 N achieves excellent results in terms of service life.In water pump bearings PETAMO GHY 133 N offers excellent compatibility with coolants containing glycol.Application notes:PETAMO GHY 133 N can be applied by means of appropriate automatic or conventional lubrication systems in a clean working environment.Product data: Article number 094061 Lubricating greases -K, DIN 51825 in connection with DIN 51502 KHC2P-30 Chemical composition, type of oil synthetic hydrocarbon oil Chemical composition, type of oil mineral oil Chemical composition, thickener polyurea Lower service temperature -40 °C / -40 °F Upper service temperature 160 °C / 320 °F Color space brown Density at 20 °C approx. 0.90 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 165 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 18 mm²/s Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree Drop point, DIN ISO 2176, IP 396 >= 250 °C Flow pressure of lubricating greases, DIN 51805, test temperature: -30 °C <= 1 400 mbar Testing of lubricating greases on FAG FE9 rolling bearing tester, DIN 51821 pt. 02, speed:6000 min-1, axial load:1500 N, temperature: 160 °C, service life F50: >= 100 h Low-temperature torque, IP 186, -40 °C, running <= 250 mNm Low-temperature torque, IP 186, -40 °C, start <= 1 000 mNm Speed factor (n x dm) approx. 500 000 mm/min Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 monthsHazard statements (CLP)Signal word: WarningHazard statements (H-phrases)H410: Very toxic to aquatic life with long lasting effects.Safety precautions (P-phrases)Prevention:P273: Avoid release to the environment.Response:P391: Collect spillage.Additional labeling (EUH-phrases)EUH208: Contains condensation products of fatty acids, tall oil with 2-amino-2-ethylpropanediol. May cause allergic reactions.Storage and disposalThis substance/mixture contains components classified as persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative (vPvB).This substance/mixture contains components identified under Article 57(f) of the REACH regulation, Commission Regulation (EU) 2018/605, or Commission Delegated Regulation (EU) 2017/2100 as endocrine-disrupting for the environment.Other relevant informationThis substance/mixture contains no components with endocrine-disrupting properties according to REACH Article 57(f) or Commission Delegated Regulation (EU) 2017/2100 or 2018/605 in concentrations of 0.1% or more.