Klüber Stabutherm GH 462 High-temperature bearing grease NLGI 2 180Kg

Stabutherm GH 462 High-temperature lubricating grease NLGI 2 | N° 020511STABUTHERM GH 462 is a hightemperature lubricating grease based on mineral oil and polyurea.It has a wide service temperature range and can be applied in rolling bearings up to 180°C. If the lubricant is used in central lubrication systems, operating temperatures up to 200°C are possible.STABUTHERM GH 462 features highly effective anti-wear properties. The grease is very adhesive and resistant to water both under static and dynamic load.STABUTHERM GH 462 is resistant to oxidation and provides reliable protection against corrosion.Size: 180 KGPackaging type: BarrelAlso available in: 1Kg can, 5kg bucket, 25kg bucket, 50kg bucket, 180kg barrelBenefits for your applicationReduction of lubricant costs due tolower consumptionreduced waste water disposal costs due to excellent water resistanceLonger component life and trouble-free operation due togood wear protection, good load- carrying capacity even at high temperaturesexcellent corrosion protectionProven pumpability and metering in central lubrication systemsApplicationSTABUTHERM GH 462 is particularly suitable for applications in smelting works and rolling mills, especially for high-temperature lubrication points supplied through a central lubrication system, e.g.Drive rollers in continuous casting installations (slabs and billets)Conveyor rollers in continuous furnacesSTABUTHERM GH 462 is also suitable for other high-temperature applications, such as:Annealing furnaces, drying stovesPlain bearings in foundry cranesHot rolls in cardboard manufacturing plantsRoad tarmacking machinesShut-off gates in bulk material installationsCooling beds, conveyor systemsRotary kilnsMachines and installations in the automotive, beverage, glass and ceramics industriesApplication notesSTABUTHERM GH 462 can be pumped through all common types of lubrication systems.Pipe friction values were determined in order to assess the pumpability in central lubrication systems. Composition, thickener polyurea Composition, type of oil  mineral oil Colour space  beige Texture homogeneous , long fibrous Service temperature, lower limit -10 °C Service temperature, upper limit, in case of continuous lubrication 180 °C NLGI grade, DIN 51818  2 Kinematic viscosity of the base oil 100°C approx. 31.5 mm²/s Kinematic viscosity of the base oil 40°C approx. 490 mm²/s Dropping point, DIN ISO 2176 / IP 396 ≥ 240 °CHazard Information (CLP)Signal Word: WarningHazard Statements (H-phrases)H317 May cause an allergic skin reaction.H319 Causes serious eye irritation.Precautionary Statements (P-phrases)Prevention:P264 Wash skin thoroughly after handling.P272 Contaminated work clothing should not be allowed out of the workplace.P280 Wear protective gloves/ eye protection/ face protection.Response:P333 + P313 If skin irritation or rash occurs: Get medical advice/ attention.P337 + P313 If eye irritation persists: Get medical advice/ attention.P362 + P364 Take off contaminated clothing and wash before reuse.Hazardous Component(s) for Labeling4-Ethyl-2-(8-heptadecenyl)-2-oxazolin-4-methanol Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com