Klüberpaste UH1 96-402 High-temp paste for food-processing 400ml spray

Klüberpaste UH1 96-402 Spray Light-coloured high-temperature paste for the food-processing and pharmaceutical industries | N° 081254Klüberpaste UH1 96-402 is a high-temperature paste designed for versatile assembly purposes in hygienically sensitive environments. It contains fully synthetic base oils and a special blend of ceramic solid lubricants.Across the “normal” temperature range up to approx. 160 °C, Klüberpaste UH1 96-402 is a water-resistant lubricating and assembly paste providing good adhesion on metals.Under permanently higher temperatures up to 1200 °C, its solid lubricating particles provide protection against tribocorrosion or fretting corrosion.Temperature range: -30°C to +1200°C Volume: 400ml spray canAlso available in: 600g cartridge, 750g can, 30kg pailBenefits for your applicationReliable dry lubrication at temperatures from 200 °C to 1200 °CGood adhesion to the friction point, also when subject to humidityApplicationsKlüberpaste UH1 96-402 Spray is suitable for a variety of friction points in food-processing and pharmaceutical machines which are subject to high loads –as an assembly paste for transition and loose fits to prevent fretting corrosionas a paste for screw connections based on high-alloy steels to optimise the tightening torque and demounting, even after long operating periodsas a long-term lubricant for low-speed guide rails, hinges, rollers, etc.Application notesShake well before use. Ensure sufficient ventilation during spraying as explosive mixtures may form.Do not spray against naked flame or onto hot or incandescent objects.Do not use spray in confined areas, e.g. control cabinets.Observe additional instructions for use in material safety data sheet and on can label. Before applying Klüberpaste UH1 96-402 Spray, all lubrication points should be thoroughly cleaned using e.g. Klüberfood NK1 Z 8-001 Spray, to ensure maximum hygiene conditions exist, mandatory for food-safe H1 lubrication. Protect product against direct sunlight and temperatures above 50 °C.Technical specifications Lower service temperature -30 °C / -22 °F Upper service temperature 1200 °C / 2192 °F NLGI grade, DIN 51818 2 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 360 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 57 mm²/s Four-ball tester, welding load, DIN 51350 pt. 04 >= 2 500 N Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating <= 1 - 90 Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopenedoriginal container, approx. 24 monthsHazard Information (CLP)Signal word: DangerHazard Statements (H-Sets)H222: Extremely flammable aerosol.H229: Pressurized container: May burst when heated.H304: May be fatal if swallowed and enters airways.H315: Causes skin irritation.H336: May cause drowsiness or dizziness.H411: Toxic to aquatic life with long-lasting effects.Precautionary Statements (P-Sets)Prevention:P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.P273: Avoid release to the environment.Response:P301 + P310: IF SWALLOWED: Immediately call Poison Center/Doctor.P331: Do NOT induce vomiting.Storage:P410 + P412: Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com