Klübersynth AG 14-61 Special lubricant for open drives 25 kg bucket

Klübersynth AG 14-61 Light-coloured special lubricant for open drives | N° 017184Klübersynth AG 14-61 has been especially designed for girth gear/pinion drives and plain bearings in wind turbines.The lubricant is resistant to high loads and provides very good corrosion protection properties.It can be used in a wide service temperature range and is therefore pumpable at temperatures as low as minus 30 °C.The grease offers good pressure and wear resistance and is free from inorganic solid lubricants like MoS2 and graphite.Due to its good compatibility with commercial sealing materials Klübersynth AG 14-61 is suitable for wide ranging applications.Temperature range: -50° C to +120° C Volume: 25 kg bucketAlso available in: 450 g cartridge, 1 kg can, 5 kg bucket, 200 kg barrelBenefits for your applicationGood pumpability and metering via centralised lubrication systems also at low temperaturesHigh corrosion protection also when exposed to salt waterLonger service life of girth gear/pinion drives due to good wear protection characteristics even under vibration conditionsNo contamination of machine environment due to use of white solid lubricantsLow consumption due to excellent adhesion even at low temperaturesApplicationsKlübersynth AG 14-61 has been designed for girth gear/pinion drives and plain bearings in wind turbines.The lubricant is also suitable for low-speed rolling bearings, plain bearings, sliding and guide rails. Application notesKlübersynth AG 14-61 can be applied by means of brush, spatula, grease gun, grease metering gun, automatic low-quantity or standard metering systems, grease cartridge, and centralised lubrication systems. We recommend conducting a metering test in the original dosing device under practical operating conditionsTechnical specifications Article number0171840177 Composition, thickener aluminium complex soap Composition, type of oil synthetic hydrocarbon oil Colour space  white Service temperature, lower limit -50 °C Service temperature, upper limit  120 °C Worked penetration 25°C, lower limit 330 0.1 mm Worked penetration 25°C, upper limit  360 0.1 mm Kinematic viscosity of the base oil,  40°C approx. 65 mm²/s Flow pressure, DIN 51805-2, -50°C ≤ 1400 mbar Dropping point, DIN ISO 2176 / IP 396 ≥ 170 °C Water resistance, DIN 51807-1, 3 h, 90°C 0 – 90 ratingKlübersynth AG14-61, Klübersynth AG 1461 Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com