Klübersynth BEH 42-232 Special grease for rolling bearings 1kg tin

Special grease for rolling bearings with wide service temperature rangeHas your experience with lithium-based greases been so good that you don’t want to abandon them even though requirements have increased? The rolling bearing grease Klübersynth BEH42-232 is based on a lithium special soap and a special fully synthetic mixture of ester and ether oil. The carefully selected additives prevent premature bearing failure due to materialfatigue even at elevated temperatures and loads. With its wide service temperature range from -40 °C to +180 °C in combination with excellent wear and corrosion protection,Klübersynth BEH 42-232 is a high-performance grease for a wide range of challenging applications.Content: 1kg canAvailable in 1kg can, 25kg bucket, 180kg drumBenefits for your applicationLonger relubrication intervals than with conventional lithium-based greasesBetter pressure absorption capacity due to special EP additives reduces wearGood compatibility with FKM elastomersVery wide service temperature grease – extraordinary for a lithium-based greaseHigh ageing and oxidation stability enable long component lifeOptimised oil release reduces friction resistance and contributes to higher efficiencyDesigned for a wide range of bearing speedsApplicationKlübersynth BEH 42-232 was especially developed for the longterm or for-life lubrication of heavily loaded rolling bearings. As was demonstrated in tests carried out on FAG FE8 and FAG FE9 rolling bearing testers, Klübersynth BEH 42-232 has performance characteristics enabling it for applications with both linear or point-to-point contact.Such for-life-lubricated rolling bearings are found e.g. in– machines for agriculture and the building industry– conveyors– textile and paper making-machines– wheel bearingsTechnical specificationsArticle number4333Lubricating greases -K, DIN 51825 in connection with DIN 51502KPE2R-40Chemical composition, thickenerspecial lithium soapChemical composition, type of oilether oilChemical composition, type of oilester oilLower service temperature-40 °C / -40 °FUpper service temperature180 °C / 356 °FColour spaceyellowDensity at 20 °Capprox.  0,90 g/cm³NLGI grade, DIN 518182Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 22,5 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 230 mm²/sCorrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water<= 1 corrosion degreeCopper corrosion, DIN 51811, (lubricating grease), 24h/150 °C1 - 150 corrosion degreeDrop point, DIN ISO 2176, IP 396>= 250 °COil separation, based on ASTM D 6184 [FTMS 791 C 321] after 30 h/150 °C<= 10 % by weightFour-ball EP tester, wear factor, DIN 51350-5, 60 s/1000N, wear scar diameter<= 1,8 mmFlow pressure of lubricating greases, DIN 51805, test temperature: -40 °C<= 1 400 mbarWater resistance, DIN 51807 pt. 01, 3 h/90 °C, rating<= 1 - 90Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.36 monthsHazard Statements (CLP)Signal word: Warning.Hazard Statements (H-phrases)H317 May cause an allergic skin reaction.H411 Toxic to aquatic life with long-lasting effects.Precautionary Statements (P-phrases)Prevention:P272 Contaminated work clothing should not be allowed out of the workplace.P273 Avoid release to the environment.P280 Wear protective gloves.Response:P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.P362 + P364 Take off contaminated clothing and wash it before reuse.P391 Collect spillage.Hazard-determining component(s) for labeling4-(1-Methyl-1-phenylethyl)-N-[4-(1-methyl-1-phenylethyl)phenyl]aniline Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com