Klüber Nosol GBY 2 Special synthetic lubricating grease 1kg can

NOSOL GBY 2 Fully synthetic lubricating and sealing grease for fittingsNOSOL GBY 2 is a fully synthetic lubricating and sealing grease for fittings, especially gas fittings and bearings. It is resistant to water, mineral oil, glycol-water mixtures and aliphatic gaseous and liquid hydrocarbons such as city and long-distance gases, natural gases such as natural gases and petroleum gases as well as their replacement gases as well as propane and propane-butane mixtures. Approvals Tested and approved according to DIN 3536: Lubricant for gas fittings in domestic installations, in gas distribution and gas transport lines,CharacteristicsExtended component life and surface protection due to good adhesion and good resistance to waterImproved component performance and extended relubrication intervals due to the good sealing effect and resistance to city, long-distance and natural gases as well as aliphatic hydrocarbonsIncreased versatility of application due to the wide operating temperature rangeTested and approved according to DIN EN 377 Class B and DIN 3536-10-90DIN designation:Lubricant DIN 3536-10-90 and DIN EN 377 Class B.DIN-DVGW registration number: NG-5161BU0518.Application areasNOSOL GBY 2 is a special lubricating and sealing grease for fittings, radiator construction, in pumps, drilling and dispensing stations as well as in the refineries, chemicals and automotive industries.Application instructionsNOSOL GBY 2 can be applied with a spatula, brush or other common application devices.The friction and lubrication points should be as bright as possible, i.e. free of oils, grease, hand sweat and dirt particles.Product data NLGI grade, DIN 51818 1 Chemical composition, type of oil mineral oil Chemical composition, type of oil synthetic hydrocarbon oil Chemical composition, thickener special lithium soap Chemical composition UV additive Lower service temperature -40 °C / -40 °F Upper service temperature 150 °C / 266 °F Color space beige Density at 20 °C approx. 0.88 g/cm³ Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 500 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 40 mm²/s Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 3 000 mPas Shear viscosity at 25°C, shear rate 300 s-1, equipment: rotational viscometer, upper limit value 5 000 mPas Corrosion inhibiting properties of lubricating greases, DIN51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree Oil separation, ASTM D 6184 [FTMS 791 C 321], after 30h/100 °C <= 4 % by weight Drop point, DIN ISO 2176 >= 250 °C Oxidation stability of lubricating greases, ASTM D942, 100 h/99 °C, pressure drop <= 0.3 bar Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating <= 1 - 90 Minimum shelf life from the date of manufacture - in a dry, frostfree place and in the unopened original container, approx. 36 months  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com