Klüberplus S 06-100 Assembly gel for elastomer components 1kg tin

Klüberplus S 06-100 Gel for facilitated assembly of elastomer and plastic components | N° 012102When joining or assembling rubber-elastic materials, it is particularly important that the components can be fitted perfectly without excessive force. Ill-fitting or damaged surfaces are frequently the result of less than optimal assembly lubrication, e.g. by mineral-oil-based products, soap solutions, water or silicones. Volume: Can 1 kgAlso available in: Canister 20 kg, Bucket 25 kg, Drum, 180 kgBenefits for your applicationCost savings due to shorter assembly times and reduction of rejects due to lower assembly forcesEnvironmentally sound and safe to useLower consumption of chemicals due to excellent temporary lubricating effectNon-flammable, water-based design – without solvent, mineral oil or siliconesPrevents workplace injuries due to less force required for assemblyNeutral towards many materials, including EPDM, NBR, FKM, VMQ, ACMApplicationsThe product concept has proven particularly successful in profiled seals, shaft seals, rubber sleeves and O-rings in the automotive industry.Joining and assembly processes with rubber-elastic materialsApplication examples:O-ringsMembranes, bushingsRadial shaft seals (RSS) on shafts and in casingsCover caps (e.g. for gear shafts)Profiled seals, e.g. for doors, windows, crankshaft casingsStopper and fixing elementsSealing elements, moulded rubber partsHoses (e.g. brake fluid, cooling fluid and fuel hoses)Application notesThe Klüberplus S 06 series shows good stability and no tendency to separation even after prolonged storage. Stirring is therefore not required prior to use.The products’ viscosity can be reduced by dilution with water. Once diluted, the product should be used up completely without delay.The Klüberplus S 06-100 series prevents during its application and upon complete evaporation of any water the immediate formation of rust / contact corrosion for a limited period of time.Technical specifications Color space white Density at 20 °C approx. 1.00 g/cm³ Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 1 400 mm²/ s pH-value, DIN ISO 976 approx. 8 Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 24 monthsHazard Information (CLP)Signal word: Warning.Hazard Statements (H-phrases)H317: May cause an allergic skin reaction.Precautionary Statements (P-phrases)Prevention:P261: Avoid breathing vapours.P272: Contaminated work clothing should not be allowed out of the workplace.P280: Wear protective gloves.Response:P302 + P352: IF ON SKIN: Wash with plenty of soap and water.P333 + P313: If skin irritation or rash occurs: Get medical advice/ attention.P362 + P364: Take off contaminated clothing and wash it before reuse.Hazardous Components:2-methylisothiazol-3(2H)-one Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com