Klübertemp HM 83-402 High-temp long-term lubrication grease 10kg

High-temperature long-term greasesKlübertemp HM greases are long-term lubricating greases based on perfluoropolyether oil and PTFE which has beenspecifically designed for high-temperature lubrication. Owing to the base oil viscosity and the high load-carrying capacity, Klübertemp HM greases are particularly suitable for the initial and relubrication of medium-speed rolling bearings subject to high temperatures and loads.Content: 10kg bucketAvailable in 800g cartridge, 1kg can, 10kg bucketAdvantages for your application:Increased plant availability and reduced maintenance effortAt very high operating temperatures up to 260 ° CUnder the influence of aggressive chemicals and vaporsGood compatibility with most plastics and elastomersApplication areas:Klübertemp HM greases are widely used in industries where the regular maintenance of lubrication points with standard temperatures of up to 260 ° C is indispensable. Klübertemp HM greases support the problem-free machine function in numerous industries and components, thanks to availability in three consistency classes. This allows an individual selection to meet the different requirements of a large number of applications optimally.Typical applications can be found in     -Conveyors     -Corrugated cardboard systems     -Plastic technology     -Textile industry     -Printing industry and the likeKlübertemp HM greases are listed in maintenance and lubrication plans by leading manufacturers.Product data:Chemical composition, type of oilPFPEChemical composition, solid lubricantPTFELower service temperature -30 °C / -22 °FUpper service temperature 260 °C / 500 °FColour spacewhiteDensity at 20 °Capprox. 1,96 g/cm³Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 420 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 40 mm²/sShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value7 000 mPasShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value13 000 mPasNLGI grade, DIN 518182Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water<= 1 corrosion degreeFlow pressure of lubricating greases, DIN 51805-2, test temperature: -30 °C <= 1 400 mbarFour-ball tester, welding load, DIN 51350 pt. 04 >= 8 000 NWater resistance, DIN 51807 pt. 01, 3 h/90 °C, rating 0 – 90Minimum shelf life from the date of manufacture – in a dry, frost freeplace and in the unopened original container, approx. 60 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com