Klüber Barrierta KM 192 High-temperature and long-term lubricants 1kg

BARRIERTA KM 192 High-temperature and long-term lubricants with good resistance to low temperaturesBARRIERTA is Europe’s oldest high-quality brand of high-temperature lubricants based on perfluorinated polyether oil (PFPE).BARRIERTA K greases enable long-term use under high temperatures and influence of media, while at the same time requiring low running torques at low temperatures. Temperature range: -50°C to +260°C Volume: 1kg canAlso available in: Bucket 10 kgBenefits for your applicationLong component lifeover a wide service temperature rangewhen exposed to aggressive chemical agentsdue to a long calculated grease lifeImproved component performancedue to low starting torques even at low temperaturesdue to resistance to high speedsdue to friction values being largely independent of temperatureApplicationsBARRIERTA K greases are highly suitable for the long-term lubrication of rolling and plain bearings, where only low driving power is available and where long-term stability is required under changing environmental loads.Even at extremely low temperatures, BARRIERTA K greases are soft enough so as not to overload low-power drive units, while on the other hand they withstand temperatures as high as 200°C and beyond.BARRIERTA K greases are used for a wide range of applications as for-life lubricants in automotive, electrical and precision engineering.Application notesFor optimum lubrication results, we recommend cleaning the friction points with white spirit 180/210 and then Klüberalfa XZ 3-1.Upon cleaning apply clean dry compressed air or hot air to remove any remaining white spirit residues.Technical specificationsArticle number090122Chemical composition, type of oilPFPEChemical composition, solid lubricantPTFELower service temperature-50 °C / -58 °FUpper service temperature260 °C / 500 °FDensity at 20 °Capprox. 1.90 g/cm³NLGI grade, DIN 518182Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value4 000 mPasShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value8 000 mPasKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 190 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 34 mm²/sSpeed factor (n x dm)approx. 600 000 mm/minHazard Information (CLP)Signal word: Warning.Hazard statements (H-statements)H319: Causes serious eye irritation.Precautionary statements (P-statements)Prevention:P264: Wash skin thoroughly after handling.P280: Wear eye protection/face protection.Response:P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P337 + P313: If eye irritation persists: Get medical advice/attention.  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com