Klüber Klüberbio Z 2-5 eco friendly rust remover spray can 400 ml

Klüberbio Z 2-5 Spray – Readily biodegradable rust removing agent | N° 081223Klüberbio Z 2-5 is a thin-bodied, fully synthetic, rust-removing agent with excellent penetration properties. This special penetrating oil provides reliable lubrication and corrosion protection without formation of unwanted gum or residues.Volume: Spray can 400 mlBenefits for your applicationEco-friendly, because readily biodegradableEasy to apply, as ready-to-use and easily spray-appliedLess cleaning required, because fully synthetic product with no tendency to gummingLess maintenance required as the product provides a cleaning, lubricating and anticorrosion effect at the same timeApplicationsFor all corroded parts, e.g. screws, bolts, hinges, sliding fits etc. The fluid distributes and penetrates readily. Thin localised corrosion films are dissolved quickly by contact with the lubricant. Extreme corrosion films may take slightly longer to dissolve.Application notesKlüberbio Z 2-5 is supplied ready-to-use. Application may be via brush, aerosol, or hand sprayer Klübermatic KD. Apply the product to the corrosion spots and allow to soak.Technical specifications Colour space yellow Appearance clear Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 5 mm²/s Density, DIN 51757, 20 °C approx. 0.88 g/cm³ Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 36 monthsHazard Statements (CLP)Signal word: DangerHazard Statements (H-phrases)H222: Extremely flammable aerosol.H229: Pressurized container: may burst if heated.Precautionary Statements (P-phrases)Prevention:P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.Storage:P410 + P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com